Autumn shoes market, the quality of leather shoes has also become the focus of attention of the majority of consumers. Industry insiders remind consumers that when buying leather shoes, they should not rely on the “leather†propaganda of merchants.
The identification method is: 1 The surface of leather leather has natural pores, while the surface layer of Artificial Leather and Synthetic Leather has no pores, and only the pattern that is imitation of leather is pressed. 2 The fiber in the inner layer of the real leather is distributed from the natural and transitional nature of the looseness. The inner layer of the artificial leather and the synthetic leather is artificially made of a knitted fabric or a textile as a base, and there is no natural distribution of density. 3 leather leather feel full, smooth; artificial leather and synthetic leather hand rubbing for a long time, there will be wet and sticky feel. 4 Use your fingers to push up from the back of the leather. The skin is fine and delicate and the dermis is smooth. The skin with no change or darkening is synthetic leather.
For yellow leather, goatskin and pigskin in natural leather, it can be identified by the characteristics of the leather surface: yellow leather pores are small, round, well-distributed and dense, with fine skin texture, rich and shiny leather, and soft and tough skin. Elasticity; goat leather has a slightly thick texture, semi-circular or fish scale, with 2-4 coarse pores next to the skin, and many fine pores around it. The skin is thin and soft. However, the elasticity and firmness are not as good as those in yellow leather; the skin of pigskin is rough, and the pores are large and sparse. The three pores are arranged in a triangular arrangement. Usually the pigskin as the upper is processed by embossing, shaving and grinding. The treatment, thereby changing some of its appearance characteristics, makes the leather look delicate and beautiful. In addition, there are common bovine two-ply shaved leather and pig two-ply shaved leather. They do not have an epidermal grain layer (green surface). The surface is a painted surface layer and has the surface characteristics of artificial leather and synthetic leather.
After the purchase is confirmed, it is required to request an invoice. At the same time, the leather shoes should be marked with the words “leather†in order to be used as evidence when a dispute arises.
Auto Fabric for Bus is a kind of fabric with nice
patterns. The fabric is used for bus seat cover, so also called bus seat
cover fabric. Weight for the auto fabric for bus is
commonly around 240g/m2~270g/m2, width of 150cm. We have many kinds of
pattern designs for choose, have good color fastness. Normally,
customers order the bus seat cover fabric bonded with foam, for this kind of fabric, choose low density foam is ok. You can check below:
Jacquard Auto Fabric For Bus
Printing Auto Fabric For Bus
Bonding Auto Fabric For Bus
Bus Fabric
Auto Seat Fabric,Auto Fabric for Bus,Auto Vinyl Fabric
Comfort Int'l Co., Ltd. , http://www.cigdecorative-fabric.com